Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on a Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tire pressure warning light

If you notice that the tyre pressure warning light has illuminated on your vehicle's dashboard, you must check the actual inflation pressure of the tyres and restore the correct pressures. The description below provides details on how to proceed, and you can also refer to the images in the video. After sitting in the driver's seat, turn on the ignition and select the settings option on the onboard computer. Press the Ok button, then select the driver assist option and press Ok again, followed by selecting the tyre pressure monitoring option. Finally, press the Ok button to confirm and reset the light.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
How to Reset the Tyre Pressure Warning Light on a Ford Focus mk3
Ford Focus (2011-2018 / MK 3) .. This guide shows how to reset the tyre pressure warning light on a Ford Focus mk3. No tools or specialist knowledge are.. …
How to reset the tire pressure sensor on the Ford Focus
Ford Focus (2011-2018 / MK 3) Today we will discover the procedure that will allow us to reset the tire pressure warning light of the Ford Focus; before performing the reset, it i…
How to Reset the Tyre Pressure Light on the Ford Focus 4
How to Reset the Tyre Pressure Light on the Ford Focus 4
Ford Focus (2018-2025 / MK 4) Watch this video to see how to reset the tyre pressure light on the fourth generation Ford Focus in simple steps; before resetting the light, ensure …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos