Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Filter on the Ford Fiesta

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Diesel particulate filter

See other generations:
Video tutorial

To replace the cabin filter on the Ford Fiesta, first remove the two plastic rivets holding the cover using a flathead screwdriver. Once the rivets are removed, apply pressure to the centre of the cover to take it off. Using the flathead screwdriver, remove the plastic rivet that holds the lower cover of the dashboard panel.

Next, using a Torx key size 20, remove the screws securing the filter. Now that all fastenings are removed, pull the filter out while lifting the cables obstructing its exit.

Once the old filter is removed, insert the new filter, ensuring to observe the direction arrows on the filter. Refit the flange and reinsert the Torx screws, tightening them with the Torx key size 20. Finally, refit the cover and various protections by screwing in the screws and rivets.


Updated on 19 July 2026 by ScegliAuto


Related tutorials

Procedure to Replace the Cabin Filter on a Ford Fiesta
Procedure to Replace the Cabin Filter on a Ford Fiesta
Ford Fiesta (2002-2008 / MK V, MK 5, Fiesta 5) In this video tutorial, you can see how to remove the cabin filter on a Ford Fiesta. To perform this cabin filter replacement, you need to remove the…
Replacing the Cabin Filter on a Ford Fiesta
Replacing the Cabin Filter on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today, let's see how to replace the cabin filter on a sixth-generation Ford Fiesta. Start by removing the protective panel under the passenger side g…
How to Replace the Cabin Filter on a 2015 Ford Fiesta
How to Replace the Cabin Filter on a 2015 Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In the following video, you will see how to change the cabin filter on the Ford Fiesta Mk6. This is a very simple, quick, and intuitive procedure tha…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos