Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bulbs in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

In this video, you will see how to replace the rear bulbs of the Ford Focus 3. To access the rear lights, open the boot and reach the lights by removing the entire headlight assembly. To do this, lift the part covered by the carpet and manually unscrew the lower butterfly support of the headlight. This way, you can slide your fingers into the upper access hole and reach the second butterfly support of the headlight. At this point, unscrew it and gently pull the headlight from the outside with your hand. Before replacing the bulbs, remove the power connector. You can now replace the bulbs you need. Once finished, follow the same procedure in reverse to reposition the headlight.

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Lights on a Ford Focus
How to Replace the Rear Lights on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this video, you will learn how to replace the bulbs of the rear lights on the second series of Ford's C segment, the Focus. Start by opening the b…
How to Lower and Remove the Rear Seats of the Ford Focus
How to Lower and Remove the Rear Seats of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will see in this brief and simple guide the steps to lower and remove the rear seats of the Ford Focus, following the instructions below. F…
How to Lower the Rear Seats of the Ford Focus
How to Lower the Rear Seats of the Ford Focus
Ford Focus (2011-2018 / MK 3) In today's video tutorial, you will learn how to fold down the rear seats of the Ford Focus, following the instructions below. First, open the rear d…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos