Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace Front Brake Pads on the Ford Endeavour 3.2L

Model: Ford Endeavour MK 2 - Years 2016-2023
Part: Brake pads

Today, you will learn how to remove and replace the front brake pads on the Ford Endeavour 3.2L in simple and quick steps. First, loosen the wheel bolts and lift the vehicle; once the wheel is removed, proceed to take off the brake caliper by unscrewing the bolts located at the back, as shown in the video. At this point, remove the old brake pads and clean the caliper of any residual dirt; before installing the new pads, you will need to compress the caliper piston to fit the new pads. Then, reassemble everything!

Updated on 22 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Electric Running Boards on the Ford Endeavour
How to Install Electric Running Boards on the Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) In this video, we show you how to install electric running boards on the Ford Endeavour. Installing electric running boards on the Ford Endeavour may…
How to Replace the Windshield of a Ford Endeavour
How to Replace the Windshield of a Ford Endeavour
Ford Endeavour (2016-2023 / MK 2) This guide provides the main instructions on how to remove and replace the front windshield of a Ford Endeavour. First, get inside the vehicle and st…
Replace the Engine Oil and Oil Filter in the Ford Endeavour 2.2 Diesel
Replace the Engine Oil and Oil Filter in the Ford Endeavour 2.2 Diesel
Ford Endeavour (2016-2023 / MK 2) Today, we will go through the steps to perform the routine maintenance service by replacing the engine oil and oil filter in the Ford Endeavour 2.2 D…

Other guides you may be interested in

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos