Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wing Mirror on a Ford Focus MK1

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Side mirror

See other generations:
Video tutorial

In this video, you will learn how to replace the wing mirror on a Ford Focus MK1: using a plastic spatula, remove the plastic cover of the deflector and disconnect the electrical connector. Unscrew the screw that holds the mirror in place with a 10 mm spanner, working from inside the deflector.

This will remove the entire assembly consisting of the mirror and support; pull out the connector and clean the base from which you extracted the mirror. Now install the new mirror: insert the electrical wire, align the clips, and reattach the screw, tightening it with the 10 mm spanner.

Reconnect the electrical connector and refit the plastic deflector. The operation is complete.


Updated on 29 July 2026 by ScegliAuto


Related tutorials

How to Remove the External Wing Mirror on the Ford Focus
How to Remove the External Wing Mirror on the Ford Focus
Ford Focus (1998-2004 / MK 1) Today's instructions will show you how to remove and replace the external wing mirror on the Ford Focus. First, open the front door and begin removin…
How to replace the external rearview mirror of the Ford Focus
How to replace the external rearview mirror of the Ford Focus
Ford Focus (1998-2004 / MK 1) In the following guide, we will discover how to replace the external rearview mirror of your Ford Focus. First of all, make sure you have a new rearv…
How to Replace the External Wing Mirror on a Ford Focus
How to Replace the External Wing Mirror on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Before you can start, open the front door of your Ford Focus. Begin by lowering the window, then unclip and remove the covers near the wing mirror. N…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos