Do it yourself
| ||||
|
Ford Bronco Sport - Video tutorial
Model: Ford Bronco Sport
Cx430
- Years 2021-2024 In order to replace the car radio of the Ford Bronco Sport, you need to pry at the rear of the central display so that the plastic cover behind it can be detached. Under this cover, you will be able to locate the screws that secure the radio display to its housing. Therefore, by unscrewing these screws, you can remove the radio by disconnecting its connectors at the back. At this point, you can connect the new radio to these connectors and secure it with the appropriate screws, which will then be covered by the corresponding central panel.
Posted on 9 July 2023 by ScegliAuto
Other guides that may interest you |
How to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.027
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |