Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light and Dome Light of the Ford Ecosport

Model: Ford Ecosport BK, MK 1 - Years 2012-2023
Part: Interior dome light bulb

In today's tutorial, you will see the steps to remove and replace the bulb of the dome light in the Ford Ecosport. First, get inside the vehicle and pry on the sides of the dome light to detach and remove it, disconnecting the electrical connector of the bulbs. Then, remove the light from the dome assembly and replace it with a new one (of the correct type and with the same fitting), as shown in the video. At this point, refit the interior light assembly, connecting the electrical cable and securing it properly to the roof!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Engine Oil Change Light on the Ford Ecosport
How to Reset the Engine Oil Change Light on the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Follow these simple instructions to reset the service light for the engine oil change on the Ford Ecosport. First, get into the vehicle and turn on t…
How to reset the service light on a Ford Ecosport
How to reset the service light on a Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) In this video, we see how to reset the service light on a Ford Ecosport: first, we need to get into the car and turn the key to position 2, wait a fe…
Replacement of the front fog light bulb of the Ford Ecosport
Replacement of the front fog light bulb of the Ford Ecosport
Ford Ecosport (2012-2023 / BK, MK 1) Today's instructions will show us how to disassemble and replace the front fog light bulb of the Ford Ecosport. First, let's move to the front of the…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos