Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Windshield Wiper Blades

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Windshield wipers

See other generations:
Video tutorial

Replacing windshield wiper blades is a typical DIY maintenance task usually performed at the change of seasons. First, select the new blades appropriately, checking the length (often the driver's side is slightly longer) and the type of attachment to the wiper arm: in this case, the blade is fixed to the arm via a side pin that fits into a specific hole on the blade itself.

Lift the wiper arm, rotate the blade 90 degrees, and pull it out sideways. Then insert the new blade, fold it forward, and lower the arm.


Updated on 21 February 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Ford Focus
How to Replace the Wiper Blades on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) It's that time of year when you need to replace the wiper blades, but you don't know how to do it yourself? Don't worry, today with our video tutoria…
Replacing the Rear Wiper Blade on Ford Focus
Replacing the Rear Wiper Blade on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the wiper blades damaged? Here’s how to replace them. Grasp the rear wiper blade with your hands, gently pull it as shown in the video (without b…
Removing the Windscreen Wiper Motor
Removing the Windscreen Wiper Motor
Ford Focus (1998-2004 / MK 1) The wiper motor is located beneath the plastic grille directly under the windscreen. To access it, you need to remove the wiper arms (a good method i…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos