Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing LED Bulbs on Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Interior dome light bulb

See other generations:
Video tutorial

Installing LED cabin lights will give the vehicle a more modern and appealing look. Start with the central ceiling light by detaching it from its position, taking care not to damage the surrounding trim.

Then, extract the lamp holder and install the one with the LED bulb, checking for correct operation (if the bulb does not light, rotate it 180 degrees). Perform the same operation with the lights located above the rear passenger seats.

Next, move on to the boot light and finish by replacing the bulbs in the external mirrors: rotate the mirror fully inwards to insert a screwdriver to rotate and detach the lamp holder, replace the bulb, check its operation, and reposition the lamp holder in its place.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Instructions for Installing LED Lights
Instructions for Installing LED Lights
Ford Focus (2011-2018 / MK 3) Replacing the original bulbs with LED ones will certainly give the vehicle a more modern and appealing look; in this regard, it is possible to purcha…
How to Remove the Rear Number Plate Lights on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the bulbs from the rear number plate of a Ford Focus? Here’s how to replace the damaged bulbs. Pry at the sides of the number plate…
How to Replace the Front Headlight Bulbs of a Ford Focus
How to Replace the Front Headlight Bulbs of a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Let's see how to replace the front headlight bulbs of a Ford Focus. Open the bonnet by pulling the lever located at the bottom right of the dashboard…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos