Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Number Plate Lights on a Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: License plate light

How do you remove the bulbs from the rear number plate of a Ford Focus? Here’s how to replace the damaged bulbs. Pry at the sides of the number plate light, removing the light unit located in the rear bumper of the car. Disconnect the bulb holder, then the bulb from it. Fit the new/LED bulb (same size and voltage), inserting it into the bulb holder, then refit the light unit into the tailgate pressing until the clips lock automatically. Replace the bulb in the other number plate light. Turn on the number plate lights and check their operation.

Updated on 27 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the number plate from a Ford Focus? Let’s see how to remove and fit the number plate located above the plastic number plate holder or d…
Ford Focus (1998-2004 / MK 1) These short and simple steps will show us how to disassemble and replace the license plate lights of the Ford Focus. First of all, let's move to the …
Ford Focus (2004-2011 / MK 2, Focus 2) In this short and simple guide, you will find instructions to remove and replace the number plate bulbs on the Ford Focus, following the instructions…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos