Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the license plate lights of the Ford Focus

Model: Ford Focus MK 1 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: License plate light

See other generations:
Video tutorial

These short and simple steps will show us how to disassemble and replace the license plate lights of the Ford Focus. First of all, let's move to the back of the car and start prying on the side slot of the plastic light cover to detach and remove it; then disconnect the electrical connector to remove it, as shown in the video.

At this point, remove the small bulb, replacing it with the new one (with the same attachment); make the electrical connection and securely fix the light cover, following the video tutorial until the end!


Posted on 9 March 2025 by ScegliAuto


Related tutorials

How to Remove the Rear Number Plate Lights on a Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the bulbs from the rear number plate of a Ford Focus? Here’s how to replace the damaged bulbs. Pry at the sides of the number plate…
How to Replace the Number Plate Bulb on a Ford Focus?
How to Replace the Number Plate Bulb on a Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the number plate bulb on a Ford Focus, loosen the two screws located on the light fixture so that it can be removed. Inside, you will find…
Removing the Number Plate from the Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the number plate from a Ford Focus? Let’s see how to remove and fit the number plate located above the plastic number plate holder or d…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos