Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Bulb on a Ford Focus?

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Light bulb

See other generations:
Video tutorial

To replace the number plate bulb on a Ford Focus, loosen the two screws located on the light fixture so that it can be removed. Inside, you will find the bulb connected between two terminals; this can then be pulled out of its housing to be replaced with a new spare part.

After the replacement, the light fixture should be reinserted into its housing above the number plate; finally, it can be secured with the appropriate fixing bolts, ensuring everything works correctly.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Adjust the Handbrake on a Ford Focus
How to Adjust the Handbrake on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this brief guide, you will learn the main instructions to adjust the handbrake lever on a Ford Focus. First, get inside the vehicle and remove the…
How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
Replacing the Starter Motor on a Ford Focus 2.0L
Replacing the Starter Motor on a Ford Focus 2.0L
Ford Focus (2004-2011 / MK 2, Focus 2) Today, you will learn how to remove and replace the starter motor on a Ford Focus 2.0L. First, open the bonnet and disconnect the battery. Next, loca…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos