Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Number Plate from the Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Checks and maintenance

How to remove the number plate from a Ford Focus? Let’s see how to remove and fit the number plate located above the plastic number plate holder or directly above the bumper. Use a screwdriver to unscrew the fixing screws located above the number plate. Unscrew each of the fixing screws one by one, and remove the number plate from above the bumper or from the number plate holder. Once the number plate is removed, you can replace it with a new one. Screw the fixing screws back onto the new or repaired number plate. Replace the front or rear number plate in the same way: check the number plate if fitted above the tailgate, bumper, or number plate holder.

Updated on 17 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the bulbs from the rear number plate of a Ford Focus? Here’s how to replace the damaged bulbs. Pry at the sides of the number plate…
Ford Focus (2004-2011 / MK 2, Focus 2) In this short and simple guide, you will find instructions to remove and replace the number plate bulbs on the Ford Focus, following the instructions…
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the number plate bulb on a Ford Focus, loosen the two screws located on the light fixture so that it can be removed. Inside, you will find…

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos