Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Glove Box on a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

See other generations:
Video tutorial

Want to remove the glove box in your car's dashboard? Here’s how to disassemble the glove box on a Ford Focus. Open the glove compartment and locate the fastening screws to be removed.

Unscrew the fastening screws located on the sides of the glove box inside the dashboard (use the appropriate inserts). Once this is done, slide the glove box towards yourself to remove it from the dashboard.

To completely remove the glove box, disconnect the electrical connector that powers the courtesy light.


Updated on 12 April 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Compartment from the Ford Focus
How to Remove the Glove Compartment from the Ford Focus
Ford Focus (2011-2018 / MK 3) Today's instructions will show you how to remove the passenger side glove compartment from the Ford Focus in simple steps. First, open the passenger …
Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
Removing Cabin Fan Resistor on Ford Focus
Removing Cabin Fan Resistor on Ford Focus
Ford Focus (1998-2004 / MK 1) Removing the cabin fan on a Ford Focus? Remove the glove compartment to access the part to be removed. Take out the glove compartment located in the …

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos