Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the glove compartment drawer of the Ford Focus

Model: Ford Focus MK 3 - Years 2011-2018
Part: Checks and maintenance

Today's instructions will show us how to disassemble the front passenger side glove box of the Ford Focus, in simple steps. First, we open the front passenger door and start removing the side plastic cover of the dashboard, by levering on the sides; then we open the glove box and unscrew all the fixing screws to remove it from the dashboard, as shown in the video. At this point, it will be possible to access the internal components of the dashboard, replacing the glove box if necessary; we apply the reverse procedure for reassembly!

Posted on 15 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Remove the Clutch Pedal from a Ford Focus
How to Remove the Clutch Pedal from a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by entering the cabin, specifically the driver's seat. Proceed to remove the carpet in the lower area of the pedal box. Next, disconnect the cl…
How to Remove the Radio from Your Ford Focus
How to Remove the Radio from Your Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the radio from your Ford Focus? Not sure how to do it? Let's see in this video how to remove the original stereo: remove the trim aroun…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos