Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Diesel Filter from a Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Diesel fuel filter

Before you can start, open the bonnet of your Ford Focus. Begin by unclipping and removing the upper engine cover. Next, unscrew and remove the bolts securing the diesel filter, then disconnect the associated hoses and the electrical connector. Once you have completed this step, the diesel filter will be free. Proceed to extract the diesel filter from its housing, and you will have successfully completed the removal.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the diesel filter of the Ford Focus 1.6 TDCi
Replacement of the diesel filter of the Ford Focus 1.6 TDCi
Ford Focus (2004-2011 / MK 2, Focus 2) The following steps will show us how to disassemble and replace the diesel filter of the Ford Focus 1.6 TDCi. First, we open the hood of the car and …
Replacing the Diesel Filter on a Ford Focus
Replacing the Diesel Filter on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Do you want to replace the diesel filter on your Ford Focus? Let’s look at removing the filter. Locate the diesel filter as shown in the video. Disco…
How to Remove the Diesel Filter on a Ford Focus
How to Remove the Diesel Filter on a Ford Focus
Ford Focus (1998-2004 / MK 1) How to remove the diesel filter on a Ford Focus? Lift the car on a column lift or suitable jack (if necessary), locate the diesel filter as shown in …

    Frequently Asked Questions

    • Focus 2004-2011 - How much does it cost to replace the diesel filter on the Ford Focus 1.6 tdci? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos