Do it yourself
Frequently asked questions about cars and motorcycles

Number Plate Bulb Replacement

Model: Ford Focus MK 1 - Years 1998-2004
Part: License plate light

Having a faulty number plate bulb could result in a fine if stopped at a checkpoint. This guide explains the steps to replace it. The number plate bulb is easily identifiable as it is shaped like a torpedo, a small cylinder with rounded ends. Opening the boot, you will notice a lens; simply lever it open with a screwdriver to access the bulb that needs replacing. Once the blown bulb is removed, insert the new one, then reposition the lens over the bulb.

Updated on 15 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (2004-2011 / MK 2, Focus 2) How to remove the number plate from a Ford Focus? Let’s see how to remove and fit the number plate located above the plastic number plate holder or d…
Ford Focus (2004-2011 / MK 2, Focus 2) How do you remove the bulbs from the rear number plate of a Ford Focus? Here’s how to replace the damaged bulbs. Pry at the sides of the number plate…
Ford Focus (2004-2011 / MK 2, Focus 2) To replace the number plate bulb on a Ford Focus, loosen the two screws located on the light fixture so that it can be removed. Inside, you will find…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos