Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : LED lights installation instructions

Ford Focus - Video tutorial

Model: Ford Focus MK 3 - Years 2011-2018
Part: Accessory Kit
Operation: LED lights installation instructions

Replacing the original bulbs with LED ones will certainly give the car a more modern and captivating look; in this regard, it is also possible to buy special kits on the net, prepared for the car model and which already include all the bulbs necessary to make this change of look. Once you have purchased the LED bulbs, proceed with the replacement of the original ones: this is an absolutely simple operation but it requires care in unhooking the lamp holder without damaging the contours of its seat; if after replacing the LED bulb does not turn on, turn it 180Â °: the LED bulbs have a polarity that must be respected since they are basically diodes. If, in addition to the interior lights, you also want to replace the reversing lights and the position lights of the headlights, then it will be necessary to remove the rear bonnet trim and the headlights.


Posted on 19 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos