Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install a Gauge on a Mustang

Model: Ford Mustang MK 6, S550 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Dashboard

See other generations:
Video tutorial

In this new video, install a new gauge in the car. To do this, detach the rounded grey part by prying at the ends and unclipping everything. Once done, remove the air vent from the support and adapt the piece.

To adapt it, use a pneumatic grinder to remove excess material. Once done, fit the new piece into the support.

After fitting, connect all the wires behind it and reassemble the support, starting with the longer piece and then the shorter one on the side, and your work is complete.


Updated on 23 February 2026 by ScegliAuto


Related tutorials

Where is the fuse box located in the 2005 Ford Mustang?
Where is the fuse box located in the 2005 Ford Mustang?
Ford Mustang (2005-2014 / S197, MK 5) If you want to safely and independently identify the box containing all the various fuses of your 2005 Ford Mustang, you must follow the few simple s…
How to disassemble the interior rearview mirror of the Ford Mustang S197
How to disassemble the interior rearview mirror of the Ford Mustang S197
Ford Mustang (2005-2014 / S197, MK 5) If you want to disassemble the interior rearview mirror of your Ford Mustang S197 by yourself but don't know how to do it, just carefully read the fo…
How to Reset the Oil Light on the 2015 Ford Mustang
How to Reset the Oil Light on the 2015 Ford Mustang
Ford Mustang (2015-2023 / MK 6, S550) To reset the oil light on your 2015 Ford Mustang, follow the steps outlined in this dedicated guide. First, enter the vehicle and start the ignition …

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos