Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats in a Ford Focus?

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Seat

See other generations:
Video tutorial

In this tutorial, see how to remove the rear seats in a Ford Focus, an extremely simple and quick operation. First, open both rear doors, then undo the four lower bolts using a T40 Torx spanner.

Next, grasp the seat from the rear edge, pull it towards you, and separate it from the base. At this point, undo the additional indicated bolts using a T45 spanner, release the side pins, and extract the backrests from the cabin.

To fit any replacements, simply follow the reverse procedure.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to remove the rear seats of the Ford Focus
How to remove the rear seats of the Ford Focus
Ford Focus (2011-2018 / MK 3) In this short and simple guide, we will see how to disassemble the rear seats of the Ford Focus, following the instructions below. First, open the re…
How to Lower and Remove the Rear Seats of the Ford Focus
How to Lower and Remove the Rear Seats of the Ford Focus
Ford Focus (2011-2018 / MK 3) Today, we will see in this brief and simple guide the steps to lower and remove the rear seats of the Ford Focus, following the instructions below. F…
How to Lower the Rear Seats of the Ford Focus?
How to Lower the Rear Seats of the Ford Focus?
Ford Focus (2011-2018 / MK 3) To lower the rear seats of the Ford Focus, lower the levers located on the side of the rear seatbacks: these levers are situated on the outer side of…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos