Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery in a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

If the battery in your Ford Focus is flat and does not hold charge after subsequent attempts to recharge, it needs replacing. Open the bonnet and locate the battery on the driver's side, near the windscreen.

Start by loosening the two screws that secure the bracket holding the battery in place, using a 10 mm socket. Next, using the same socket, disconnect the two terminals from the battery, starting with the negative terminal.

Ensure the cables are positioned so they do not touch metal parts and do not obstruct the removal of the battery. Remove the battery by pushing it back and slightly rotating it upwards; this can be a bit tricky due to limited space.

Install the new battery by reversing the steps.


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Ford Focus
How to Replace the Key Battery on a Ford Focus
Ford Focus (2011-2018 / MK 3) Start by inserting a thin but sturdy tool into the slot on the side of your Ford Focus key to pry it open. Next, you will need to unclip and remove t…
Air filter replacement for Ford Focus MK3.
Air filter replacement for Ford Focus MK3.
Ford Focus (2011-2018 / MK 3) To replace the air filter that feeds the injection system of the Ford Focus, we open the hood of the engine compartment, and we find the filter box o…
How to Replace the Remote Battery of the Ford Focus?
How to Replace the Remote Battery of the Ford Focus?
Ford Focus (2011-2018 / MK 3) Replacing the remote battery of the Ford Focus, as shown in this tutorial, is an extremely simple and quick task. You will need a small flat-head scr…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos