Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Bumper on a Ford Escape

Model: Ford Escape MK 3 - Years 2013-2019
Part: Front bumper

Briefly, we will see the instructions that will allow you to remove and replace the front bumper on a Ford Escape in simple steps. First, open the hood and start removing all the plastic clips found on the top and bottom of the front bumper; then remove the additional clips located on both sides of the front wheel wells, as shown in the video. At this point, gently disengage the bumper from the sides until you completely remove it; then replace it with the new one, securing it properly with the plastic clips located on the sides!

Updated on 21 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Bumper Grille from a Ford Escape
Removing the Front Bumper Grille from a Ford Escape
Ford Escape (2008-2012 / MK 2) In this short and simple guide, discover the procedure needed to remove and replace the front bumper grille on a Ford Escape. First, open the hood an…
How to Remove the Headlight from a 2016 Ford Escape
How to Remove the Headlight from a 2016 Ford Escape
Ford Escape (2013-2019 / MK 3) In this video tutorial, you will see how to remove the front headlight from the Ford Escape MK3. To start, lift the hood of the vehicle and locate al…
Replace the Front Headlight of the Ford Escape MK1
Replace the Front Headlight of the Ford Escape MK1
Ford Escape (2001-2007 / MK 1) Today, you will learn how to disassemble and replace the front headlight assembly of the first-generation Ford Escape by following these simple steps…

Other guides you may be interested in

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos