Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wipers on a Ford Focus

Model: Ford Focus MK 3 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

To carry out this simple and quick operation, no special tools are required. Just follow this straightforward guide to do it yourself.

Lift the wiper arm and press the two release buttons located along the wiper arm, just near the attachment of the blade. This will allow you to detach and remove the old blade so you can install the new one. To complete the replacement, simply reposition the wiper arm to its original position.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to Change Wiper Blades on Ford Focus
How to Change Wiper Blades on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are your wiper blades damaged? Here's how to replace them. Take the front wiper blade to be replaced, gently pull the movable blade as shown in the v…
Replacing the Rear Wiper Blade on Ford Focus
Replacing the Rear Wiper Blade on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the wiper blades damaged? Here’s how to replace them. Grasp the rear wiper blade with your hands, gently pull it as shown in the video (without b…
How to replace the gear shift knob of the Ford Focus 2008
How to replace the gear shift knob of the Ford Focus 2008
Ford Focus (2004-2011 / MK 2, Focus 2) In order to successfully replace one of the front windshield wipers of your Ford Focus (2008), all you need to do is pay attention to the steps descr…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos