Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Wiper Blades on Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Windshield wipers

Are your wiper blades damaged? Here's how to replace them. Take the front wiper blade to be replaced, gently pull the movable blade as shown in the video (without breaking it) and slide it off the arm on the front. Fit the new blade onto the arm, you will hear a click when it is securely attached. Finally, lower the wiper arm onto the windscreen and perform the same operation on the second blade. Check the correct installation. Lower both blades and operate the wiper controls from inside the car to verify functionality.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Bumper from a Ford Focus
How to Remove the Front Bumper from a Ford Focus
Ford Focus (1998-2004 / MK 1) Before you start, open the bonnet of your Ford Focus. Begin by unscrewing and removing the screws and bolts located around the perimeter of the bumpe…
How to Adjust the Handbrake on a Ford Focus
How to Adjust the Handbrake on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) In this brief guide, you will learn the main instructions to adjust the handbrake lever on a Ford Focus. First, get inside the vehicle and remove the…
Where to Find the Fuse Box on a 2005 Ford Focus
Where to Find the Fuse Box on a 2005 Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) If you do not know the exact location of the fuse box in your 2005 Ford Focus, do not worry. Just read this guide carefully and follow the steps to l…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos