Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : What is the front wiper relay in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Windscreen wipers
Operation: What is the front wiper relay in the Ford Focus?

In the event that the front wipers of our Ford Focus suddenly stop working, the first thing we can do is check the state of the respective relay. As shown in this video, it is located in the box located inside the passenger compartment, precisely in the lower area of the dashboard on the driver's side. The relay in question is the second in the upper row. The fuse for the windscreen wipers can also be found in the same box, located in the fifth slot on the bottom row. In the event of a faulty fuse or relay, make sure you use a spare with the same characteristics.


Posted on 17 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus windshield washer pump fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos