Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Focus
    4. : Where is the windshield wiper relay located in the Ford Focus?

Ford Focus - Video tutorial

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Windscreen wipers
Operation: Where is the windshield wiper relay located in the Ford Focus?

If the windshield wipers of our Ford Focus have suddenly stopped working, the first thing we can do is check the condition of the respective relay, whose location is indicated in this video. As shown, the relay in question is located in the box inside the engine compartment, below the black plastic cover right in front of the windshield. It is the first one in the left block, when looking at the box from the front. If it is faulty, make sure to replace it with a replacement of the same characteristics and always operate with the vehicle turned off, so as not to cause any damage.


Posted on 9 November 2023 by ScegliAuto

    Frequently Asked Questions

    • Focus 2004-2011 - Where is the Ford Focus windshield washer pump fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos