Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Radiator Fan Relay Located on the Ford Focus?

Model: Ford Focus MK 4 - Years 2018-2025
Part: Radiator

If the radiator fan on your Ford Focus has suddenly stopped working, the first thing to do is check the status of the respective relay, whose position is shown in this video. As demonstrated, the relay is located in the box within the engine bay, protected by the plastic cover next to the battery. It is labelled R12 and is the first in the left half of the box. Ensure you replace a faulty relay with a spare of the same specifications, otherwise you may damage the fan.

Updated on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radiator Fan on a Ford Focus
Replacing the Radiator Fan on a Ford Focus
Ford Focus (1998-2004 / MK 1) Follow this simple guide to remove and replace the cooling radiator fan on a Ford Focus. First, lift the vehicle and remove the oxygen sensor from th…
Where is the Starter Relay in the Ford Focus?
Where is the Starter Relay in the Ford Focus?
Ford Focus (2004-2011 / MK 2, Focus 2) This video shows where the starter relay is located in the Ford Focus and how to proceed if you need to replace it. As shown, the relay is found in t…
Location of the Fuse Boxes and Relays on a Ford Focus Mk2
Location of the Fuse Boxes and Relays on a Ford Focus Mk2
Ford Focus (2004-2011 / MK 2, Focus 2) Let’s see where the fuses and relays are located on the Ford Focus MK2; the first box is next to the battery, in the bonnet, located just above this …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos