Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Radiator Fan on a Ford Focus

Model: Ford Focus MK 1 - Years 1998-2004

Follow this simple guide to remove and replace the cooling radiator fan on a Ford Focus. First, lift the vehicle and remove the oxygen sensor from the fan. Next, disconnect the various electrical connectors as shown in the video. Now, unscrew the mounting screws of the fan to remove it from the lower part of the engine. Then, install the new engine cooling fan, following the video until the end!

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Fan Resistor on a Ford Focus
Replacing the Cabin Fan Resistor on a Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today's steps will show you how to remove and replace the cabin fan resistor on a Ford Focus. First, get inside the vehicle on the front passenger si…
Where are the Radiator Fan Relays Located in the Ford Focus?
Where are the Radiator Fan Relays Located in the Ford Focus?
Ford Focus (1998-2004 / MK 1) If the radiator fan in your Ford Focus has suddenly stopped working, first check the status of the relays, whose location is shown in this video. As …
Where is the Radiator Fan Relay Located on the Ford Focus?
Where is the Radiator Fan Relay Located on the Ford Focus?
Ford Focus (2018-2025 / MK 4) If the radiator fan on your Ford Focus has suddenly stopped working, the first thing to do is check the status of the respective relay, whose positio…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - Where are the fuse boxes in the Ford Focus Mk2? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos