Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radiator and Fan on the Ford Focus MK1 2.0 SVT

Model: Ford Focus MK 1 - Years 1998-2004
Part: Radiator

In this video tutorial, you will learn how to remove and replace the radiator and cooling fan on the first generation Ford Focus with a 2.0 SVT engine. First, open the bonnet and remove the battery and battery tray; unscrew the screws located at the top of the bumper and remove the plastic clips, as shown in the video. At this point, disconnect the electrical connectors of the fan and radiator sensor and drain the coolant by disconnecting the hoses; remove and replace the radiator, following the video to the end!

Updated on 22 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Radiator Fan on a Ford Focus
Replacing the Radiator Fan on a Ford Focus
Ford Focus (1998-2004 / MK 1) Follow this simple guide to remove and replace the cooling radiator fan on a Ford Focus. First, lift the vehicle and remove the oxygen sensor from th…
Replacing the Radiator on a Ford Focus
Replacing the Radiator on a Ford Focus
Ford Focus (2011-2018 / MK 3) Want to remove the radiator on a Ford Focus? Here’s how to do it. Lift the bonnet, then remove the air filter housing to access all the radiator secu…
How to Replace the Cabin Fan on a Ford Focus?
How to Replace the Cabin Fan on a Ford Focus?
Ford Focus (2011-2018 / MK 3) To replace the cabin fan on the Ford Focus, detach the panel on the right side of the dashboard next to the glove compartment on the passenger side. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos