Do it yourself
Frequently asked questions about cars and motorcycles

Where are the Radiator Fan Relays Located in the Ford Focus?

Model: Ford Focus MK 1 - Years 1998-2004
Part: Checks and maintenance

If the radiator fan in your Ford Focus has suddenly stopped working, first check the status of the relays, whose location is shown in this video. As demonstrated, there are four relays located in the box inside the engine compartment, protected by the black plastic cover near the battery. They are the last ones at the bottom when looking at the box from the front. If a relay is faulty, ensure you use a replacement with equivalent specifications and always work with the vehicle turned off to avoid any damage.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Ford Focus (1998-2004 / MK 1) Follow this simple guide to remove and replace the cooling radiator fan on a Ford Focus. First, lift the vehicle and remove the oxygen sensor from th…
Ford Focus (1998-2004 / MK 1) In this video tutorial, you will learn how to remove and replace the radiator and cooling fan on the first generation Ford Focus with a 2.0 SVT engin…
Ford Focus (2018-2025 / MK 4) If the radiator fan on your Ford Focus has suddenly stopped working, the first thing to do is check the status of the respective relay, whose positio…

Other guides you may be interested in

    Frequently Asked Questions

    • Focus 2004-2011 - What problems encountered on the Ford 1.6 tdci 90 hp engine? Read answer
    • Focus 2004-2011 - Where is the outside temperature sensor of a Ford Focus located? Read answer
    • Focus 1998-2004 - Where is the immobilizer of a Ford Focus located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos