Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the stop bulbs in the Ford Focus?

Model: Ford Focus MK 3 - Years 2011-2018
Part: Tail light bulb

In this tutorial we can see how to replace the stop light bulbs in the Ford Focus, an extremely simple and quick operation. First of all, make sure the key is not inserted, then open the trunk door, locate the small cover on the back of the headlight in question and unhook it. Next, unscrew the plastic fastening nut, grab the light and, pulling it towards us, separate it from the bodywork. At this point, all that remains is to remove the faulty bulb by rotating it counterclockwise, disconnect it and insert the replacement. To put everything back together, simply follow the reverse procedure.

Posted on 17 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake lights bulbs in the Ford Focus?
How to replace the brake lights bulbs in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial, we can see how to replace the brake light bulbs in the Ford Focus, a very simple and quick operation. Before proceeding, make sure …
Replacement of the rear headlight bulb of the Ford Focus
Replacement of the rear headlight bulb of the Ford Focus
Ford Focus (2011-2018 / MK 3) Below we will see the main instructions that will allow us to dismantle and replace the rear headlight bulbs of the Ford Focus. First, we open the re…
Replacement of the rear taillight of the Ford Focus
Replacement of the rear taillight of the Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Today we will see the information that will show us how to disassemble and replace the rear taillight and its bulbs of the Ford Focus. First, we open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos