Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear taillight of the Ford Focus

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Tail light

Today we will see the information that will show us how to disassemble and replace the rear taillight and its bulbs of the Ford Focus. First, we open the hood of the car and start unscrewing the fixing screws of the rear taillight, located on the sides; then we disconnect the electrical connector of the bulbs to remove it, as shown in the video. At this point, we replace any faulty bulbs with new ones, replacing either the entire rear light; we correctly reassemble the rear taillight and check the operation of all the stop lights.

Posted on 11 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the rear taillight of a Ford Focus
Disassembly of the rear taillight of a Ford Focus
Ford Focus (2011-2018 / MK 3) In today's video, we will see how to replace the rear taillight of a third generation Ford Focus. We start the operation by opening the rear trunk of…
How to disassemble the rear headlight of the Ford Focus
How to disassemble the rear headlight of the Ford Focus
Ford Focus (1998-2004 / MK 1) In this guide, we will discover the information that will allow us to disassemble and replace the rear headlight and its bulbs of the Ford Focus. Fir…
How to replace the brake lights bulbs in the Ford Focus?
How to replace the brake lights bulbs in the Ford Focus?
Ford Focus (2011-2018 / MK 3) In this tutorial, we can see how to replace the brake light bulbs in the Ford Focus, a very simple and quick operation. Before proceeding, make sure …

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos