Do it yourself
Frequently asked questions about cars and motorcycles

How to enter the maintenance mode of the Ford Edge handbrake

Model: Ford Edge MK 2, Cd539 - Years 2015-2024
Part: Checks and maintenance

Today we will see the main instructions that will allow us to enter the maintenance mode of the parking brake of the Ford Edge. First of all, we get on board the car and start pressing and holding down the accelerator pedal; then we turn on the ignition and hold down the parking brake button for about ten seconds, as shown in the video. At this point, we will enter the parking brake maintenance menu, where we will activate or deactivate various functions; you can perform the operation at any time, following the video tutorial until the end!

Posted on 25 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Ford Edge (2015-2024 / MK 2, Cd539) To reset the electronic handbrake on a Ford Edge, press the accelerator pedal and pull up the handbrake button while the ignition is off. Then, press…
Ford Edge (2006-2014 / U387, MK 1) In this tutorial we can see how to program a remote control in the Ford Edge, a very simple and quick operation. To do this, we will obviously need a…
Ford Edge (2006-2014 / U387, MK 1) In this video we see how to solve the heating problem of a 2013 Ford Edge that is not working: not all the buttons on the Edge are the same type (als…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos