Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Outer Mirror Cap on a Ford Fusion

Model: Ford Fusion North America MK 2 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Side mirror

See other generations:
Video tutorial

In this tutorial, you will see how to remove the outer mirror cap on a Ford Fusion, a very simple and quick operation. First, stand in front of the mirror you will be working on, then tilt the glass completely down, grasp it from the top edge, and pry it off the support.

Next, locate the three indicated slots, insert a flathead screwdriver into them, and unlock the clips securing the cap. At this point, just remove the cap from the base and install the replacement if needed.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the Outside Mirror on the Ford Fusion North America?
How to Replace the Outside Mirror on the Ford Fusion North America?
Ford Fusion North America (2013-2020 / MK 2) To replace the outside mirror on the Ford Fusion North America, you need to remove the cover of the window switch panel to access the underlying scre…
Removing the rear seatbelt of the Ford Fusion
Removing the rear seatbelt of the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today, let's explore useful information on how to remove and replace the rear seatbelt of the Ford Fusion, following the instructions below. First, a…
Where to Find the Fuse Box on a 2006 Ford Fusion
Where to Find the Fuse Box on a 2006 Ford Fusion
Ford Fusion North America (2006-2012 / MK 1) If you own a 2006 Ford Fusion and want to know where all the various fuses are located, just read this guide carefully and follow the described steps…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos