Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the rear windshield wiper fuse located in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Windshield wipers

If the windshield wiper of our Ford Fiesta has suddenly stopped working, we can first of all check the status of the respective fuse, whose position is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, specifically behind the passenger's glove compartment. It is a 15A fuse labeled with the code F13. If it is faulty, make sure to use a replacement with equivalent specifications and always operate with the vehicle turned off, otherwise we could damage the windshield wiper motor or ourselves.

Posted on 7 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Wiper Motor on Ford Fiesta
Replacing Rear Wiper Motor on Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) Let's look at removing the rear wiper motor on a Ford Fiesta. Lift the tailgate, and remove the plastic cover under the rear window on the inside to …
Replacing the Rear Wiper on a Ford Fiesta
Replacing the Rear Wiper on a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's video, you will see how to remove and replace the rear wiper on a Ford Fiesta, a procedure that can be applied to most mid-range cars. Fir…
How to Replace the Wiper Blades on a Ford Fiesta
How to Replace the Wiper Blades on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this video tutorial, you will see how to replace the wiper blades on a Ford Fiesta by following a few simple steps: first, purchase new wiper blad…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos