Do it yourself
Frequently asked questions about cars and motorcycles

Model: Garelli Vip
Part:

Today, we will give you some tips for restoring a Garelli Vip. First, if the chrome parts are rusty, clean them with steel wool and a suitable polishing spray. If the exhaust and engine are greasy, clean them as well. Now move on to the most challenging and time-consuming part: sand all the bodywork parts, then disassemble them. To paint your Garelli, remember to apply two coats of primer first and let it dry. Only then should you paint with your preferred colours. Another simple maintenance task that would make your Garelli look even "younger" is changing the mirrors.

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vip Before you begin, position your Garelli Vip on the centre stand. The seat of this moped is secured to the frame with lower bolts. Start by unscrewing…
Vip To disassemble the Garelli VIP engine, you need to loosen the screws that secure it to its housing in the center of the frame. You will also need to …
Vip The main instructions in this guide will show you how to install the new automatic clutch on the Garelli Vip 3. To replace the clutch assembly, you n…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos