Do it yourself
| ||||
|
Model: Garelli Vip
In today's video tutorial we will see how to disassemble the head, cylinder and piston (thermal group) of the Garelli Vip, but also of the Piaggio Si. The disassembly operation of the thermal group can take place both with the engine installed on the bodywork and on the bench. ; then we begin to unscrew the head fixing screws, using a socket wrench with extension. At this point we unscrew the nuts of the muffler manifold, in order to remove it from the cylinder; then let's take the cylinder out of the piston, then removing the pin of the latter to remove it from the connecting rod, following the video to the end!
Posted on 15 May 2024 by ScegliAuto
|
How to replace the battery on the Honda X-ADV 750 2018This guide will explain the battery replacement procedure for the Honda X-ADV 750 from 2018 onwards. Here are the steps that need to be taken: 1. Move the wheel located on the handlebar on the left, towards "Seat"; 2. Lift the saddle and remove the various gaskets and plastic supports below; 3. With a plastic tool and a wrench, remove the remaining screws and pins by applying a slight pressure during the lever, without forcing particularly; 4. Unscrew the last screws of the positive and negative and the relative strap that keeps the battery tied to its seat; 5. Remove the battery to be replaced; 6. Check that the new spare battery has the same voltage and amperage to avoid electrical problems; 7. Reassemble everything by following the steps described in reverse. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |