Do it yourself
Frequently asked questions about cars and motorcycles

Model: Garelli Vip
Part:

To replace the seat on the Garelli Vip, loosen the bolts securing the old seat to its housing: these bolts will be located directly underneath the seat itself. Once these bolts have been removed, you can completely take out the seat from its housing and insert the new replacement parts. First, install the new under-seat compartment, securing it with the appropriate fixing bolts: once the under-seat compartment is installed, position the seat and secure it with its screws.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Vip Before you begin, position your Garelli Vip on the centre stand. The seat of this moped is secured to the frame with lower bolts. Start by unscrewing…
Vip To replace the clutch of the Garelli VIP, you will need to loosen the screws that hold the cover of the clutch discs: once the screws holding the cov…
Vip Today, we will give you some tips for restoring a Garelli Vip. First, if the chrome parts are rusty, clean them with steel wool and a suitable polish…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos