|
Do it yourself
| |||
| ||||
Model: Garelli Vip
To dismantle the engine of the Garelli VIP, first remove it from its housing by unscrewing all the bolts that secure it to the respective supports. Once the engine is freed from the supports and connectors, you can detach the piston from the connecting rod by removing the corresponding circlip. After the piston is removed, you can also detach the pedals by removing the pins that secure the protective covers of the engine's internal components. This will allow you to access and dismantle them.
Updated on 16 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Vip
To disassemble the Garelli VIP engine, you need to loosen the screws that secure it to its housing in the center of the frame. You will also need to …
Vip
Before you begin, position your Garelli Vip on the centre stand. The seat of this moped is secured to the frame with lower bolts. Start by unscrewing…
Vip
The disassembly of the Garelli VIP engine block involves loosening the screws that fix the component to its housing in the center of the frame: in or…
|
How to Replace the Front Headlight on the BMW F800GS
In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
