Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Garelli Vip
Part: Engine

On the Garelli VIP, dismantling the engine involves first removing it from its housing by loosening all the bolts that secure it to the respective supports. Once the engine is freed from the supports and the connectors attached to it, you can remove the cylinder and detach the piston from the connecting rod, removing the corresponding circlip. After the piston is removed, you can also detach the pedals by removing the pins that secure the protective covers of the internal engine components: these can then be removed and replaced.

Updated on 26 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you dismantle the engine of the Garelli VIP?
How do you dismantle the engine of the Garelli VIP?
Vip To disassemble the Garelli VIP engine, you need to loosen the screws that secure it to its housing in the center of the frame. You will also need to …
How to Remove the Seat of a Garelli Vip
How to Remove the Seat of a Garelli Vip
Vip Before you begin, position your Garelli Vip on the centre stand. The seat of this moped is secured to the frame with lower bolts. Start by unscrewing…
How do you disassemble the engine of the Garelli VIP?
Vip The disassembly of the Garelli VIP engine block involves loosening the screws that fix the component to its housing in the center of the frame: in or…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos