|
Do it yourself
| |||
| ||||
Model: Gasgas Sm 700
To replace the muffler on the GasGas SM 700, you will need to loosen the screws that secure the side cover panel of the fender. Once this panel has been removed, you can proceed to loosen the screws that hold the exhaust tip in its housing. Then, you can start by loosening the clamp located between the exhaust tip and the collector: this will allow you to replace the old muffler with a new one so that it can be secured. After installation, you should check that everything is functioning correctly.
Posted on 31 December 2025 by ScegliAuto
Video tutorial
Related tutorials
Sm 700
The procedure for replacing the exhaust on the GasGas SM 700 can be done by loosening the screws that secure the right side panel of the rear fender:…
Sm 700
In order to replace the exhaust of the GasGas SM 700, you need to loosen the screws that secure the seat to its housing: these screws are located on …
Sm 700
The exhaust pipe installed on the GasGas SM 700 can be replaced by loosening the screws that secure the right side panel of the corresponding fender …
|
How to Replace the Tyres on the Husaberg FE 450
In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.004
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |