Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 250
Part: Engine oil

In this tutorial, we will see how to change the engine oil in a GASGAS EC 250F, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then position a container underneath it, locate the drain bolt, and unscrew it with a socket spanner. Next, unscrew the cap of the secondary filter, clean it of any dirt residue, and proceed to open the cap of the main filter, which will need to be replaced. At this point, all that remains is to reassemble everything and pour in the required amount of oil through the designated upper hole.

Posted on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install the engine protection cover on the Gasgas EC 250F
How to install the engine protection cover on the Gasgas EC 250F
Ec 250 In this brief and simple guide, we will see the steps to install the engine protection cover, as well as the one on the side, of the Gasgas EC 250F e…
How to Replace the Exhaust on a GasGas EC 250F?
How to Replace the Exhaust on a GasGas EC 250F?
Ec 250 To replace the exhaust on the GasGas EC 250F, loosen the bolts that secure the exhaust cover at the rear, on the right side of the bike. By loosening…
How to Replace the Air Filter on Gasgas EC 250F
Ec 250 In today's guide, you will find instructions to remove and replace the engine air filter on a Gasgas EC 350F enduro bike. First, remove the seat of t…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos