Do it yourself
Frequently asked questions about cars and motorcycles

How to install the engine protection cover on the Gasgas EC 250F

Model: Gasgas Ec 250

Video tutorial

In this brief and simple guide, we will see the steps to install the engine protection cover, as well as the one on the side, of the Gasgas EC 250F enduro bike. First, place your bike on a stand and start unscrewing the fixing screws of the engine casing using a socket spanner with an extension; then install the cover, ensuring that the pre-drilled holes align with those of the engine casing, as shown in the video.

At this point, cross-tighten the screws to secure the engine cover!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Ec 250 To replace the exhaust on the GasGas EC 250F, loosen the bolts that secure the exhaust cover at the rear, on the right side of the bike. By loosening…
Ec 250 In this tutorial, we will see how to change the engine oil in a GASGAS EC 250F, a very simple and quick operation. First, wait for the engine to cool…
Ec 250 In today's guide, you will find instructions to remove and replace the engine air filter on a Gasgas EC 350F enduro bike. First, remove the seat of t…

How to replace the air filter on a Sym VF3I?

To replace the air filter on a Sym VF3I, open the underseat compartment to access the screws and disconnect the battery connectors. The battery will then need to be removed from its housing, allowing access to the components underneath. Here, you will find the filter box cover, which should be removed by unscrewing the fastening screws. Once the old filter is removed, insert the new one into its place and secure the cover with the screws. Then, reinstall the battery and close the underseat compartment.

Watch the video!


by ScegliAuto

More videos