Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Front Wheel of a Gasgas Txt 125

Model: Gasgas Txt 125
Part: Wheel

Video tutorial

In this video tutorial, you will see how to remove the front wheel of a Gasgas Txt 125 trial bike. First, lift your bike with a stand and unscrew the screws of the plastic cover of the brake caliper, removing it along with the brake caliper and pads.

Next, unscrew the central fixing bolt of the wheel and then extract it, as illustrated in the video. The replacement of the front wheel bearings is then shown; apply the reverse procedure for refitting the front wheel!


Updated on 8 April 2026 by ScegliAuto


Related tutorials

Txt 125 To replace the fork on the GasGas TXT 125, first completely remove the front wheel of the bike: to do this, loosen the screws that secure the corresp…
Txt 125 To replace the exhaust on the GasGas TXT 125, loosen the screws that secure it to the corresponding supports located on the side of the bike: the scr…
Txt 125 To replace the clutch on a GasGas TXT 125, loosen the screws securing the cover on the right side of the engine: this will allow you to remove the co…

How to Replace the Engine Oil and Oil Filter of an Aprilia Tuono V4

In this guide, we will see the instructions on how to carry out the routine maintenance service by replacing the engine oil and oil filter of the Aprilia Tuono V4 motorcycle. First, place the bike on the stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one (screwing by hand and tightening gently), as shown in the video. At this point, top up with new engine oil, bringing the level to the maximum mark.

Watch the video!


by ScegliAuto

More videos