Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Txt 125
Part: Engine oil

Start the bike for a few minutes to warm up the oil, which will become less viscous and drain more easily and quickly. As shown in the video, unscrew the drain plug underneath the bike and collect the used oil in a container (dispose of it properly). While the oil is draining, unscrew and check the related filter: if it is in good condition, give it a quick clean; otherwise, replace it, ensuring to lubricate the O-ring of the new filter (even with old oil) before installation. Close the drain plug, measure the quantity of oil, and refill the same amount through the upper hole.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the gear lever on the GasGas TXT 125?
How do you replace the gear lever on the GasGas TXT 125?
Txt 125 In order to replace the gear shift lever of the GasGas TXT 125, you need to loosen the nut that fixes it to the external part of the gearbox, on the …
Removing the Clutch from a Gasgas TXT 125
Removing the Clutch from a Gasgas TXT 125
Txt 125 This tutorial shows how to remove the clutch from a Gasgas TXT 125, following these simple steps. First, drain the oil from your bike by unscrewing t…
How to Replace the Water Pump on the GasGas TXT 125?
How to Replace the Water Pump on the GasGas TXT 125?
Txt 125 To replace the water pump on the GasGas TXT 125, locate the pump on the right side of the bike, next to the clutch cover. To remove the water pump, d…

How to Replace the Rear Mudguard on the Ducati Monster 696?

In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then temporarily disconnect the exhaust silencer to gain working space. Next, locate the four fixing bolts of the mudguard, loosen them using an Allen key, and separate the mudguard from the frame. At this point, disconnect the rear light connector, attach the replacement, and reassemble everything by following the procedure in reverse.

Watch the video!


by ScegliAuto

More videos