Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 300
Part:

To replace the front fairings on the GasGas EC 300, first remove the screws securing the seat of the bike, allowing it to be taken off to access the screws holding the fairings. Once the seat is completely removed, unscrew the screws securing the side fairings, removing them entirely. Next, unscrew the screws that secure the fairing at the front of the seat, just above the tank. When all these fairings have been removed, you can fit the new ones and reattach the seat.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Piston of the GasGas EC 300?
How to Replace the Piston of the GasGas EC 300?
Ec 300 To replace the piston of the GasGas EC 300, you need to remove the side fairings by unscrewing the appropriate fixing bolts; once these are detached,…
How to replace the front brake pads on the Gasgas EC 300
How to replace the front brake pads on the Gasgas EC 300
Ec 300 This guide outlines the steps to remove and replace the front brake pads on the Gasgas EC 300 enduro motorcycle. First, place the motorcycle on a sta…
How to Replace the Crankshaft Bearings on the GasGas EC 300?
How to Replace the Crankshaft Bearings on the GasGas EC 300?
Ec 300 To replace the crankshaft bearings on the GasGas EC 300, you need to remove the engine from its housing by unscrewing the bolts that secure it to the…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos