Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 300
Part: Carburetor

Today, you will learn how to remove and replace the carburettor on a Gasgas EC 300 enduro bike by following these simple steps. First, place your bike on a stand and start loosening the fixing screw of the air filter clamp to disconnect it; then disconnect the fuel hose and the throttle cable, subsequently detaching the carburettor from the intake manifold. At this point, install the new carburettor of the correct type; perform the tuning and idle adjustment, following the video tutorial until the end for reassembly!

Updated on 1 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for disassembling the starter motor on a Gasgas EC 300
Instructions for disassembling the starter motor on a Gasgas EC 300
Ec 300 In this video tutorial, you will see instructions on how to disassemble and replace the electric starter motor on a Gasgas EC 300 motorcycle. First, …
How to Replace the Clutch on the GasGas EC 300
How to Replace the Clutch on the GasGas EC 300
Ec 300 You can replace the clutch installed on the GasGas EC 300 by unscrewing the bolts that secure the clutch cover: this can now be completely removed fr…
How to replace the starter motor on the GasGas EC 300
How to replace the starter motor on the GasGas EC 300
Ec 300 To replace the starter motor on the GasGas EC 300, detach the left side fairing of the bike, located near the bottom of the fuel tank. Once the panel…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos