Do it yourself
Frequently asked questions about cars and motorcycles
To replace the piston of the GasGas EC 300, you need to remove the side fairings by unscrewing the appropriate fixing bolts; once these are detached, you will be able to access the underlying components, particularly disconnecting all connectors attached to the engine. Now, the cylinder head must be removed by unscrewing the bolts that secure it, allowing access to the piston underneath: by removing the corresponding retaining ring, you can detach the old piston from its conrod and replace it with a new one. After the replacement, reassemble all the previously removed components.

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec 300 To replace the piston on the GasGas EC 300, remove the seat and part of the fairing to access the mechanical components. Next, remove the starter mot…
Ec 300 To replace the piston on a GasGas EC 300, remove the seat and part of the bodywork to access the mechanical parts. First, remove the starter and the …
Ec 300 It will be possible to replace the piston of the GasGas EC 300 by first loosening the fastening screws that secure the engine block to its supports i…

How to Service the Beta RR 350

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!

Watch the video!


by ScegliAuto

More videos