Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Fluid on the Gasgas EC 300

Model: Gasgas Ec 300
Part: Brake fluid

Video tutorial

This guide explains how to bleed and replace the front brake fluid on the Gasgas EC 300 enduro bike. First, remove the screws from the brake fluid reservoir cover to take it off; then connect a small tube to the bleed valve found on the caliper, opening it with a spanner to drain the fluid using a pump, as shown in the video.

At this point, close the valve and top up with the appropriate fluid; pull the front brake lever to circulate the fluid!


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to replace the front brake pads on the Gasgas EC 300
How to replace the front brake pads on the Gasgas EC 300
Ec 300 This guide outlines the steps to remove and replace the front brake pads on the Gasgas EC 300 enduro motorcycle. First, place the motorcycle on a sta…
How do you replace the rear brake disc of the GasGas EC 300?
How do you replace the rear brake disc of the GasGas EC 300?
Ec 300 In order to replace the rear brake disc of the GasGas EC 300, you need to loosen the nuts that secure the rear wheel of the motorcycle to its housing…
How to Replace the Thermostat on the Gasgas EC 300
How to Replace the Thermostat on the Gasgas EC 300
Ec 300 This guide provides the main instructions on how to remove and replace the radiator thermostat on the Gasgas EC 300 enduro bike. First, place your bi…

How to Replace the Headlight Bulb of a Triumph Speed Twin?

To replace the headlight bulb of the Triumph Speed Twin, you need to loosen the screws that secure the headlight unit in place: these screws will be located at the bottom right and bottom left of the headlight unit. Once these are loosened, you can proceed to pull the headlight from its housing and disconnect the connectors inside: the corresponding bulb can now be extracted from inside the headlight unit, allowing you to insert the new one, remounting all the parts you just removed.

Watch the video!


by ScegliAuto

More videos