Do it yourself
Frequently asked questions about cars and motorcycles
Today, this guide shows you how to remove and replace the headlight bulb or the entire headlamp on the Gasgas EC 300 enduro bike. First, remove the plastic ties on the sides to detach the headlamp from the frame; then disconnect the electrical connector of the bulb, as illustrated in the video. Now, replace the dipped beam bulb with a new one of the correct type (in this case, a LED light is installed); then install the optical unit and reassemble everything by reversing the disassembly procedure!

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Ec 300 Today, we will go through the instructions to remove and replace the front headlight and its bulb on the Gasgas EC 300 enduro bike. First, move to th…
Ec 300 This guide provides the main instructions on how to change the oil in the gearbox of the Gasgas EC 300 enduro bike. First, place the bike on the stan…
Ec 300 You can replace the clutch installed on the GasGas EC 300 by unscrewing the bolts that secure the clutch cover: this can now be completely removed fr…

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos